1/2" LightBlocker Mini blinds are great for adjusting light control by rotating the louvers. When lifted up the stack is minimal. They can be used with basically any room decor. Made of spring tempered aluminum they are resistant to bends or creases.
Available in a wide variety of colors. They are somewhat room darkening when closed. Light will not pass through the aluminum but some light can come through where the slats overlap.
Features: Wand Tilt standard. Comes standard with sleek, lightblocking steel headrail. No valance required. Steel C-Shape bottomrail. Wider windows can be done as 2 or 3 on 1 Headrail. Most components are color coordinated to match blind. Mounting Hardware & Install Screws are included with most products. Lifetime warranty against defects in parts and workmanship. Free UPS ground shipping on all orders.
Production time: Approximately 6-7 business days plus 1-5 days for shipping.
Color Accuracy Policy: Although we do our best to make sure that the colors printed on our web site are accurate, actual colors will vary. In addition, subtle color differences and textures may not be fully appreciated on some systems due to differences in monitors and/or display cards. Due to the fact that our products are all custom made, and can't be returned, you need to be sure that you can live with any color variations that are possible from our scanning of the actual samples. If an exact color match is required, then please request a sample before placing your order. Once you receive your sample, keep in mind that all samples may still have minimal color variations as stated by the manufacturers.
Also, most of our products use Color Coordinated Components. Color Coordinated means similar colors but not necessarily the same exact color. An exact match in color is not always possible for the components of the blind/shade. The color that best coordinates with the product's slat/fabric color will be chosen for use on the components. All components will not necessarily be of the same exact coordinated color. Some examples of color coordinated component would be ladder strings, lift cords, tilter mechanisms, bottom rails, tassels, etc.
Available Options For This Product
Mount: Available as Inside or Outside Mount.
Headrail: Standard as Single Headrail, 2 on 1 Headrail Adds $31, 3 on 1 Headrail Adds $38.
Controls: Tilt Left/Lift Right is standard. Also available Tilt Right/Lift Left, Tilt Right/Lift Right or Tilt Left/Lift Left. Center tilt required for blinds under 9".
Tilter Type: Wand Tilt only.
Hold Downs: Available for outside mount blinds.
Standard Brackets: Available in 4 sizes. Standard, 1 3/4, 2 3/4, 4 3/4".
2 on 1 Headrail
3 on 1 Headrail
Specifications & Installation Requirements
Product Specifications
Minimum Width
6"
Minimum Height
6"
Maximum Width (1 on 1 headrail) Maximum (2 or 3 headrail)
120" 190"
Maximum Height
96"
Installation Requirements
Minimum Inside Mount Depth
3/4"
Minimum Inside Mount Depth (fully recessed)
1 3/4"
Minimum Outside Mounting Surface
1 1/4"
Headrail Specifications
Headrail Depth
1 1/2"
Headrail Height
1"
Bottom Rail Dimensions
3/8" x 3/4"
Product Constraints:
The max width available for Center Tilt is 9".
Same Side controls are not avaliable less than 12".
What is Covered
These aluminum horizontal blinds product is warranted against original defects in materials or workmanship for the time period specified provided that:
(1) The product was properly installed in a residential dwelling;
(2) The product was made or assembled exclusively from Springs Window Fashions’ materials and components;
(3) Springs Window Fashions recommendations were followed with regard to limitations and specifications.
Who is Covered
This warranty extends only to you as the original purchaser of the above stated blind.
Obligations to The Consumer
The obligations of Springs Window Fashions are limited to the repair or replacement of parts or product found to be defective.
Springs Window Fashions is not responsible for shipping costs or labor costs for measuring and taking the blind down or reinstalling the product.
If repairs are made under this warranty, the repairs will be made with like or similar parts.
What the Warranty Does Not Cover
This warranty does not cover conditions or damages caused by accidents, alterations, misuse, or failure to follow instructions for measurement, installations, cleaning or maintenance. In addition,
normal wear and tear are not covered by the warranty.
All materials can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics tend to yellow or crack. All cords will eventually wear out. Springs
Window Fashions considers these things normal wear and tear and are not covered by this warranty.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WRITTEN OR ORAL WARRANTIES OR OBLIGATIONS AND LIABILITIES.
No person is authorized to extend or alter this warranty.
SPRINGS WINDOW FASHIONS SHALL HAVE NO LIABILITY WHATSOEVER FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you.
Shipping Fees
UPS or FedEx Ground Shipping:
This applies to all orders under 96 inches in width or length shipping to an address in the contiguous 48 states of the U.S. If it travels by UPS or FedEx then shipping is FREE! Please call us for shipping quotes outside the covered area. Excluding all Plantation Shutters, which incurrs a $130.00 flat shipping fee per manufacturer.
Oversize Products Shipping Fee:
If your package is 96 inches or over in width or length it will be shipped by common carrier (semi truck) from the nearest manufacturing facility to you. There will be a $60.00 oversize shipping charge for any order with products that are 96 inches or more in width or length. This charge is per manufacturer. Meaning if you order two oversized products and they are from two different manufacturers (two different brands) then there will be TWO $60 charges for a total of $120 shipping. But, if you have more than one product over 96 inches at it is from same manufacturer you will only pay one oversize fee. The fee is per order, not per blind. Excluding all Plantation Shutters, which incurs a $130.00 flat shipping fee per manufacturer.
Wand Tilt standard.
)
0 Samples Selected
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
![2 on 1 Headrail Style Aluminum Shade](javascript:openColorSamplePopup("prestige/aluminum-blinds/Two-on-one-aluminum-lrg.jpg") )
![2 on 1 Headrail Style Aluminum Shade](javascript:openColorSamplePopup("prestige/aluminum-blinds/three-on-one-alluminum-lrg.jpg") )
The max width available for Center Tilt is 9".